D*AP8
58
Setup GUI – AUDIO PROCESSOR –
Input
You may set the input conditions for both programs (Program 1 and 2) and the AUX path here:
Link (Program 1)
[Quad / Movie / Live / Linked / Linked & LFE]
You may select one of the possible multichannel modes to enable
gang setting of the parameter values
Link (Progarm 2)
[Linked / Unlinked]
For stereo operation you may link the setup parameters
Similar applies fro the AUX path.
Input
[Enable / Disable]
Enables or disables the input section
Mute
[ON / OFF]
Input Gain (dB)
[-80.0 … 0.0 … 20.0]
Mono
[Stereo / L+R Mono / L/L Mono / R/R Mono]
Not applicable for multichannel program 1
Input HPF (Hz)
[OFF / 20 / 40 / 80 / 120]
Input LPF (kHz)
[OFF / 15 / 20 / 22]
Input Delay Coarse(ms)
[0.0 … 2000.0]
Input Delay Fine (samples)
[0 … 2000]
