D*AP8
39
Setup GUI – INTERFACES – Dante I/O Interface –
Outputs
Outputs
The signals from the
Dante
board to the network. They will
also appear in the device
ROUTING
section.
Channel
Numeric count of the channels.
Channel
Up to 16 labels can be assigned
Label
for each stream from the
interface to the network.
When you hover with the mouse
over the channel labels, you will
get a tool tip that that shows the
other (if any) labels assigned to
the same outputs assigned fro
multi layer routing.
Setup GUI – INTERFACES – Dante I/O Interface –
Network
Dante Redundancy
The
Dante
interface allows redundant network operation.
Pls. refer to manufacturer's documentations of your Ethernet
equipment on supported redundant operation.
