D*AP8
29
Group 1 – 4
The embedding process distinguishes between 4 different modes for each
group independently:
Embedding –
a new group will be built
Replace
– t
he structure of the group from the input is kept and the audio
content is simple replaced
Delete
–
the group from the input is deleted
OFF
–
the embedder for that group is turned off
VANC Metadata
[Enabled - / Disabled – (selected SDID#)]
Embedder Status
For details see
SMPTE 2020-2
standard.
ARIB STD-B39
Meta information standard.
Control Data Status
Status
[Available / Not Available]
Audio Mode
See
ARIB
Japanese standard "Structure of Inter-Stationary Control Data
Conveyed by Ancillary Data Packets"
http://www.arib.or.jp/english/html/overview/doc/2-STD-B39v1_2.pdf
Setup GUI – INTERFACES – SDI I/O interface –
Local Routing
The SDI interface comes with a local routing matrix to shuffle audio signals from and to the system (device)
(i.e. to and from the central device router) and from and to the physical de-embedders / embedders.
The example below shows the default routing that sends all signals 1:1 from the physical de-embedders
[INTERFACE – SDI IN G1 CH1 … SDI IN G4 CH4] to the internal device matrix
[SYSTEM – SDI De-Embedder DEM 1 … DEM 16].
The signals from the device router [SYSTEM – SDI Embedder EMB 1 … EMB 16] are routed by default
1:1 to the physical embedders [INTERFACE – SDI OUT G1 CH1 … G4 CH4].
