D*AP8
82
Setup GUI – AUDIO PROCESSOR –
Mobile UI
The
D*AP8
provides an extra
UI
for live applications that may be used on tablets or mobile phones but
may also be displayed on a PC's web browser. When you click on the
<Mobile>
soft button in the upper
right area of the GUI above the
<Help>
button, a new tab in your current browser will open up.
But you can also use the URL:
"<IP-address>/mobile"
to open the
operator UI
elsewhere
(in a browser of a different PC or a mobile phone or a tablet). For mobile devices it requires network
integration of the
D*AP8
via a WLAN.
At the bottom left you have a
representation of the Hotkey
settings (see EVENTS > Triggers >
Remote Hotkeys).
By pressing the respective
<go>
soft button you will trigger an action
the same way a remote Hotkey
would do.
On the bottom right you have a
selected number of actions
available to trigger
(see EVENTS > Actions >
Event Actions).
By pressing the respective
<force>
soft button you will trigger an action
the same way a trigger would do.
In the upper left hand corner you can open the Options settings:
You can enable / disable full screen display.
Here you can decide between three arrangements of the
soft buttons:
Buttons A
shows the rectangle buttons with assigned
dark colors, active ones are highlighted.
Buttons B
shows the greyish rectangle buttons, active
ones are highlighted.
List
shows the initial button list display
Desktop Version
But you can also open another tab where the GUI will be loaded.
The color scheme will be defined on the EVENTS > Triggers > Remote Hotkey page and / or
EVENTS > Actions > Event Actions. The brightness of the buttons depends on the momentary status of
the represented function. Dark color means inactive, medium bright color means that the function is
triggered and bright color means that the D*AP8 has fully finished the operation.
