D*AP8
75
Setup GUI – AUDIO PROCESSOR –
Monitor
The monitor output of the DSP can be connected to the outputs of
individual function blocks of one of the programs.
Source
Section / Channel
[Surround / 2L / 2R]
Processing Block
[OFF (Mute) / Input / Input Conditioner
/ Equalizer / Level Magic / Output
Conditioner]
Downmix
Center Mix Level (dB)
[-12.0 … -3.0 … 0.0]
Surround Mix Level (dB) [-12.0 … -3.0 … 0.0]
Output
Mute
[OFF / ON]
Attenuation (dB)
[-80.0 … 0.0]
Mono
[Stereo / L+R Mono / L/L Mono / R/R
Mono]
Delay Coarse (ms)
[0.0 ... 2000.0]
Delay Fine (samples)
[0 ... 2000]
Setup GUI – COPROCESSOR –
Overview
If you have installed the optional co-processor JDSPA it is possible to extend the functionality of the
D*AP8
by extra FM conditioners. E.g. it allows you to use the
D*AP8
for multiple FM processing
channels in one device. In this case an additional tab
COPROCESSOR
appears
in the top navigation line:
Above you see four FM conditioner function blocks with their labels as they appear in the routing matrix
(1L … 4R) of the
D*AP8
under COPROCESSOR OUTPUT and COPROCESSOR INPUT
COPR1 … COPR8.
