User's Guide _______________________________________________________________________
102 ______________________________________________________________________________
VERS
Use the command
VERS
to display software version information.
Example:
>vers
TRANSMITTER / 5.00
>
Resetting Transmitter Using Serial
Line
RESET
This command resets the device. The user port switches to start-up
output mode selected with command SMODE.
Locking Menu/Keypad by Using
Serial Line
LOCK
Use the
LOCK
command to prevent the user from entering the menu
using the keypad, or to lock the keypad completely. You can
optionally set a 4-digit PIN code, for example 4444.
If a PIN code has been set, the user will be prompted to enter the code
when trying to access the menu. Entering the code correctly will
disable the lock until the user returns back to the basic view.
LOCK
[
x
] [
yyyy
]
where
x
= Keypad locking level, range 0...2. The options are:
0 - No lock (enables full access)
1 - Menu locked, but graphs are accessible
2 - Keypad completely disabled
yyyy = 4-digit PIN code. The code can only be set when keypad
locking level is 1.
