Chapter 5 _______________________________________________________________ Maintenance
JUMO _________________________________________________________________________ 131
CHAPTER 5
MAINTENANCE
This chapter contains information that is needed in basic maintenance
of the product.
Periodic Maintenance
Cleaning
Clean the transmitter enclosure with a soft, lint-free cloth moistened
with mild detergent.
Changing the Probe Filter
1.
Turn the filter counter-clockwise to loosen it.
2.
Remove the filter from the probe. Be careful not to touch the
sensor with the filter. Without the filter in place, the sensor is
easily damaged – handle the probe carefully.
3.
Install a new filter on the probe. When using the stainless steel
filter (for oil and fuel cell), take care to tighten the filter properly
(recommended force 5 Nm).
New filters can be ordered from JUMO, see section Options and
Accessories on page 156.
