Chapter 4 _________________________________________________________________ Operation
JUMO _________________________________________________________________________ 103
Examples:
>lock 1 4444
Keyboard lock : 1 [4444]
>
>lock 1
Keyboard lock : 1
>
Data Recording
Data recording function is always on and collects data automatically
into the memory of the device. If the optional data logger module is
installed, the transmitter uses it automatically. Recorded data does not
disappear from the memory when the power is switched off. Collected
data can be observed in a form of a graph in the graphical view of the
display or it can be listed out by using the serial line or MI70 Link
program.
Selecting Data Recording
Quantities
If the device is provided with the optional display, the recorded
quantities are always those selected for the display. Up to three
quantities can be recorded at a time. For instructions on how to select
the display quantities with the keypad, see section Changing
Quantities and Units on page 90.
DSEL
Use the serial line command
DSEL
to select the quantities to be
recorded if the transmitter is not equipped with display/keypad.
DSEL
[
xxx
]
where
xxx =
Data recording quantity. See Table 1 on page 16 and Table 2
on page 17 for the quantities.
Example:
>dsel rh t tdf
RH T Tdf
>
Enter the command without parameters and press
ENTER
to display
the current recording parameters.
