User's Guide _______________________________________________________________________
80 _______________________________________________________________________________
8.
After setting the wireless network parameters, press the
Exit
button in the
Wireless Network Settings
menu. You will be
asked to confirm the new settings. Note that when new settings
are saved, all currently active WLAN connections are
disconnected.
Using Serial Line
Use the serial line command
WLAN
to view or set the wireless
network settings. If you set an encrypted network type, you will be
asked to enter the security key. With the WEP encryption you must
enter the encryption key in hexadecimal (10 hexdecimals for 64-bit
encryption or 26 hexadecimals for 128-bit encryption) or with plain
ASCII characters (5 characters for 64-bit encryption or 13 characters
for 128-bit encryption). A WPA key must be 8 … 63 ASCII
characters.
WLAN
[
SSID TYPE
]
Where
SSID
= The network name in 1 … 32 characters
TYPE
= The security type of the wireless network. The
options are:
OPEN
OPEN/WEP
WPA-PSK/TKIP
WPA-PSK/CCMP
Examples:
>wlan ?
Network SSID : WLAN-AP
Type : OPEN
>
>wlan accesspoint wpa-psk/tkip
Network SSID : accesspoint
Type : WPA-PSK/TKIP
WPA-PSK phrase ? thequickbrownfox
Warning: Active connection will be disconnected.
Save changes (Y/N) ? y
OK
>
