Chapter 4 _________________________________________________________________ Operation
JUMO __________________________________________________________________________ 91
2.
Press the
►
arrow button to select
Display
.
3.
Press
►
arrow button to select
Quantities
.
4.
Select the quantity by using the
▲▼
arrow buttons. Confirm the
selection by pressing
SELECT
. You can select 1 ... 3 display
quantities at a time.
5.
Press
EXIT
to return to the basic display.
To select display units:
1.
Press any of the arrow buttons to open the MAIN MENU.
2.
Press the
►
arrow button to select
Display
.
3.
Use the
▲▼
arrow buttons to select
Units
. Confirm the
selection by pressing the right-hand arrow button.
4.
Use the
▲▼
arrow buttons to select display units. Confirm the
selection by pressing
CHANGE
. The unit changes from metric
to non-metric or the other way round.
5.
Press
EXIT
to return to the basic display.
NOTE
Changing the display quantities/units (by using the display/keypad)
has no effect on the serial output data.
Using Serial Line
Use the serial line command
FORM
to change the format or select a
certain quantities for the output commands
SEND
and
R
. Use the
serial line command UNIT to select metric or non-metric output units.
FORM
Use the serial line command
FORM
to change the format or select a
certain quantities for the output commands
SEND
and
R
.
FORM
[
x
]
where
x
=
Formatter string
Formatter string consists of quantities and modifiers.
When entering the command, use the abbreviations of the quantities.
For more information on quantities, see Table 1 and Table 2 Seite 16.
