Chapter 4 _________________________________________________________________ Operation
JUMO __________________________________________________________________________ 83
3.
Select the connection type using the
Connect using
pull down
menu.
If you are connecting to the transmitter using the serial interface,
select the PC communications port where the serial cable is
connected and click
OK
. If you are using the USB-RJ45 cable
to connect to the Service Port, check the communications port
that the cable is using with the
USB Instrument Finder
program that has been installed in the Windows Start menu.
0709-005
Figure 54
Connecting Using Serial Interface
If you are connecting using the LAN or WLAN interface, select
TCP/IP (Winsock)
.
Enter the IP address of the interface in the
Host address
field, and 23 as the
Port number
. Click
OK
to
connect to the transmitter.
0709-007
Figure 55
Connecting Using a Network
