11
■
Installing the connecting rod
1) Move pedal
3
to the rght or left as llustrated by
the arrows so that motor control lever
1
and con-
nectng rod
2
are straghtened.
■
Adjusting the pedal angle
1) The pedal tlt can be freely adjusted by changng
the length of the connectng rod.
2) Loosen adjust screw
4
, and adjust the length of
connectng rod
2
.
When the nserton of the connector s completed,
lock the cord clamps.
q
Take care so that the cord s not caught between
the rear cover and the electrcal box man body,
close the rear cover whle pressng secton A on
the lower sde of the rear cover, and tghten four
screws
1
.
w
Press down cord presser plate C of cord through
hole B of the front cover, press the cord, and
tghten screws
2
.
1
2
3
A
B
C
4
3
4
B
A
1
2
Clamp
1
4
3
2
4
Lightly press the corner of clamp.
(Cord clamp is locked with a click.)
How to lock the cord clamp
4-9. Attaching the connecting rod
1) Fx connectng rod
1
to nstallng hole
B
of pedal
lever
2
wth nut
3
.
2) Installng connectng rod
1
to nstallng hole
A
wll lengthen the pedal depressng stroke, and the
pedal operaton at a medum speed wll be easer.
4-10. Adjustment of the pedal
