55
(2) Condensation custom edit
■
Condensation custom edit screen
1) Press
to dsplay the reverse feed sttchng settng screen.
2) Press
2
or
4
n the reverse feed sttchng settng screen to move to the condensaton custom edt
screen.
3) Set the needle entry poston for each step n the condensaton custom edt screen.
1
: Set the step wth “+” and “–” key.
2
: Set the value of needle entry pont from the center of zgzag wth “+” and “–”. “+” value comes on the
rght sde and “–” value on the left sde.
3
: Needle entry poston s dsplayed.
4
: Insert needle entry pont 0. 0 for one sttch to the exstng step. Then the sttches move backward
one sttch by one sttch.
* It s not possble to nsert t when the number of total sttches s 64 sttches.
5
: Delete one sttch of the needle entry of the exstng step. Then the sttches move forward one sttch
by one sttch.
* It s not possble to delete t when the number of total sttches s “1” sttch.
4) When settng up to the last step s completed, proceed to the next step, press
6
and put END
mark .
* When the last step s 64, t s not necessary to set "END" mark .
5) When all nputtng procedures have been completed, press
key to determne.
■
the second screen of reverse feed stitching setting
Example) Condensation custom at sewing start Width 4 mm for 2-step zigzag stitch
1st
sttch
– 2.0 – 0.7
0.6
2.0
0.6
– 0.7 – 2.0 – 0.7
0.6
2.0
END
Input
value
Needle
entry
2nd
sttch
3rd
sttch
4th
sttch
5th
sttch
6th
sttch
7th
sttch
8th
sttch
9th
sttch
10th
sttch
11th
sttch
q
q w
q w
y
e
r
t
1
Input the data of the lst n the condensaton custom edt screen.
2
Set 4 mm at
1
n the 2nd screen of reverse feed sttchng settng. When
1
s changed, the nputted
needle entry can be ncreased/decreased.
