48
(1) overlapped stitching
■
overlapped stitching setting screen
Example) 2-step zigzag
■
Sewing shape setting screen
1) Select showng overlapped sttchng wth
1
of sewng shape settng screen.
2) Press
to dsplay overlapped sttchng settng screen.
3) Set the number of sttches and number of processes of the respectve processes n the overlapped sttch-
ng settng screen
2
: Set the number of sttches of process A wth “+” and “–”. 0 to 19 sttches for the number of sttches of
secton A can be set.
3
: Set the number of sttches of process B wth “+” and “–”. 0 to 19 sttches for the number of sttches of
secton B can be set.
4
: Set the number of sttches of process C wth “+” and “–”. 0 to 19 sttches for the number of sttches of
secton C can be set.
5
: Set the number of processes wth “+” and “–”. 0 to 9 tmes for the number of processes can be set.
4) By performing depressing the front part of the pedal, the sewing machine repeats the specified number of
tmes of normal and reverse feed sttchng, performs automatc thread trmmng and stops.
* Turn ON the thread trmmng prohbton swtch ON when you desre to stop the sewng machne wth
needle UP poston wthout performng thread trmmng after all processes have been completed.
* Thread trmmng s performed at any occason n case of one-shot sttchng and the last of process. The
one-shot sttchng cannot be turned OFF.
(2) Programmed stitching
■
Programmed stitching
Programmed sttchng can program the constant-dmenson sttchng process up to 20 steps and set the
number of sttches to each step up to 500 sttches.
* For the programmed sttchng, the pattern regstraton cannot be performed.
Standard delivery level of the key lock is “1”. When the level of the key lock is the case
other than “0”, be sure to change the level to “0” to perform the operation below.
6-8. Selection of the kind of stitching
Select the knd of sttchng
from among free sttchng ,
overlapped sttchng and
programmed sttchng .
Press swtch
1
of sewng
shape settng screen to se-
lect the knd.
q
q
w e r t
w e r t