78
WArNING :
To avoid possible personal injuries caused by movement other than that you desired, do not operate
the switches in the procedure other than those required, as described below, to specify the functions.
Do not perform switch operations other than those described in the following explanations.
Be sure to re-turn the power switch oN after one second or more has passed. If the power is
turned oN immediately after turning it oFF, the sewing machine may not work normally. In
this case, turn oN the power again.
6-16. Setting for functions
2) Press swtch
1
for ap-
proxmately three sec-
onds.
3) Press swtch
2
for ap-
proxmately three sec-
onds.
4) Ths screen s the func-
ton settng screen.
Change the settng No.
wth “+/–” Key of swtch
3
.
For the detals of settng
No., see P 81.
Example) Changng the
flicker reducing
functon (Settng
No. 5)
Change the settng No. to “5”
wth “+” Key of swtch
3
n
the figure above.
・
Press swtch
4
.
Settng No. Set value
There are two knds of functon settngs, Level 1 and Level 2.
Level 1 : Change of settng can be performed wthout turnng OFF the power swtch.
Level 2 : It s necessary to turn OFF the power swtch after change of settng.
For the detals of settng No., see p81.
[Setting procedure of Level 2]
1) Turn ON the power. When the needle bar s not n ts UP poston, turn the handwheel to brng the needle
bar to ts UP poston.
q
w
r
e
e
(1) How to change over to the function setting mode
