64
■
Cycle stitching edit screen
■
Cycle stitching setting screen
4) Settng of each step can be dsplayed n the cycle sttchng settng screen.
3
: Select the regstered steps wth “+” and “–”.
* Steps that can be selected are the step that number of sttches s not set and the step that automat-
c thread trmmng s set or that the number of sttches s not set mmedately before the step only.
4
: Pattern No. whch s beng selected at present s dsplayed. Edtng cannot be performed.
5
: Stop state of the step whch s beng selected at present s dsplayed. Edtng cannot be performed.
6
: Number of sttches of the step whch s beng selected at present s dsplayed. Edtng cannot be
performed.
7
: Poston of the presser of the step whch s beng selected at present s dsplayed. Edtng cannot be
performed.
5) Press
to dsplay the cycle sttchng edt screen.
6) Set pattern No., number of sttches, stop poston and poston of the presser for each step n the cycle
sttchng edt screen.
8
: Set the step wth “+” and “–”. As many as 20 steps can be set.
9
: Select pattern No. wth “+" and “–”. (Pattern Nos. to whch patterns have been regstered only can be set.)
!0
: Set the number of sttches wth “+” and “–”. As many as 500 sttches can be set.
!1
: Select the stop state of the step.
q
Needle DOWN stop
w
Needle UP stop
e
Thread trmmng (Effectve only when the thread trmmng devce s provded.)
!2
: Select the poston of the presser. (Only when the auto-lfter s provded.)
q
Presser UP stop
w
Presser DOWN stop
!3
: When the presser UP stop
s selected at
!2
, set the presser lftng tme
wth “+” and “–”.
7) When settng up to the last step s completed, proceed to the next step, press
9
and put END mark .
* When the last step s 20, t s not necessary to set “END” mark .
8) When all settngs have been completed, press
key to determne.
e r t
y u
e
i o !0 !1
i o !0
!2
!1 !2
!3
!3
