JUKI APW-896N/IP-420, Instruction Manual, Page: 95 / 142

− 91 −
⑥ Stop the count
Display the production control screen referring to "VI-15.(3)
Observing the production control information" p. 88 .
When the count is being performed, STOP button J is
displayed. When STOP button J is pressed, the count is
stopped.
After the stop, START button I is displayed at the position
of STOP button. When continuing the count, press START but-
ton I again. The counted value is not cleared until CLEAR
button K is pressed.
⑦
Clear the counted value
When clearing the counted value, set the count to the stop state
and press CLEAR button L .
The value to be cleared is the present target value M and actual
results value N .
* CLEAR button is displayed only in case of stop state.
⑤ Start the count of number of pieces of production
Press START button
I
and the count of number of pieces
of production is started.
K
I
L
O
M
N
When CLEAR button
L
is pressed, the clear confirmation
screen is displayed.
When CLEAR button
O
is pressed in the clear confirmation
screen, the counted value is cleared.
J