− 72 −
No.
Item
Setting range
/
Edit unit
Initial value
Back tack control method selection
Sewing pattern of back tack can be selected.
- - -
1st mode (standard)
Sewing first the longer seams (Emphasis is put on sewing
quality.)
2nd mode
Sewing first the shorter seams (Emphasis is put on produc-
tivity.)
3rd mode
1st mode and 2nd mode are changed over according to
the deflection amount.
4th mode
Same specifications as those of APW-196 (Emphasis is
put on speed.)
* 2nd mode and 4th mode do not correspond with the standard welt
-
ing patch scale.
Cycle sewing coupling function
Odd-numbered pattern can be coupled to even-numbered pattern and
as many as 12 steps can be sewn.
Only combination of 1 and 2, 3 and 4, 5 and 6, 7 and 8, 9 and 10, 11
and 12, 13 and 14, 15 and 16, 17 and 18, and 19 and 20 can be cou-
pled.
- - -
Coupling function
OFF
Coupling function
ON
Corner knife index constant motion
Normally, the long corner knife is not used unless the value is more
than the specified value. However, by turning this function ON, the long
corner knife is always used at the time of deflection.
- - -
Constant index
OFF
Constant index ON
Condensation control method selection
Sewing pattern of condensation can be selected.
- - -
1st mode (standard)
Sewing first the longer seams
2nd mode
Sewing first the shorter seams
* 2nd mode does not correspond with the standard welting patch
scale.