manualshive.com logo in svg

JUKI APW-896N/IP-420, Instruction Manual, Page: 40 / 142

Share
Download
JUKI APW-896N/IP-420 Instruction Manual Download Page 40

− 36 −

 

Press NUMBER OF PCS. COUNTER button 

 

C

  In “Count-

er setting screen (screen A)”, and “number of pcs. setting screen 
(screen C)” is displayed. Then the kind of counter can be set.

Number of pcs. counter 

(Screen C)

C

Counter setting screen 

(Screen A)

[ Number of pcs. counter ]

UP counter :
Every time one of finished products is sewn, the existing value is 

counted up.

*  In case of independent sewing : 1 time of sewing
 

In case of alternate sewing : 2 times of sewing

 

In case of cycle sewing : 1 time of cycle sewing

The number given in each case above is regarded as one of fin-

ished products.

When the existing value is equal to the set value, the count-up 
screen is displayed.

DOWN counter :

Every time one of finished products is sewn, the existing value 
is counted down. When the existing value is reached to “0”, the 
count-up screen is displayed.

Counter unused :

Number of pcs. counter is set to the prohibition.

Summary of Contents for APW-896N/IP-420















































































































































Reviews:

No comments