− 118 −
(6) Deflection amount setting
1. Automatic deflection detection function
By pressing the button of automatic deflection detection function, the flap is read using two flap sensors
and the deflection can be automatically set.
However, when
Right flap angle detection device is not mounted, left flap (double welt and single
welt with one side flap) only can be used.
①
When the input screen of independent sewing mode, alternate sewing mode or cycle sewing mode, DE-
FLECTION AMOUNT SETTING button
A
is displayed.
When this button is pressed, “DEFLECTION AMOUNT SETTING SCREEN (SCREEN A)” is displayed.
Independent sewing mode
/ cycle sewing mode
A
A
A
Alternate sewing mode
②
Setting of automatic deflection detection function
When using the automatic deflection detection function, it is possi-
ble to set by pressing AUTOMATIC DEFLECTION DETECTION
AT THE START OF SEWING button
B
or AUTOMATIC DEFLEC-
TION DETECTION AT THE END OF SEWING button
C
.
Only when setting the left flap sewing, it is effective to press down
the button.
B
C
When setting this function or setting the changeover of compensation of flap concealed stitching po
-
sition using the deflection detection of
, the flap concealed stitching position is automatically
set.
(Refer to
and
of
"VI-8.(2) Sewing data list" p. 52
In case of the flap of deflection of 2 mm or less, select the deflection manual input mode since the
automatic deflection reading mode may judge the flap as the parallel flap.