manualshive.com logo in svg

JUKI APW-896N/IP-420, Instruction Manual, Page: 73 / 142

Share
Download
JUKI APW-896N/IP-420 Instruction Manual Download Page 73

− 69 −

No.

Item

Setting range

/

Edit unit

Initial value

Changeover of compensation of flap concealed stitching position 
using deflection detection

When the automatic deflection detection of left flap is not set, compen-
sation of flap concealed stitching is automatically performed using the 
second flap sensor.

*  When the automatic deflection detection is set, compensation of flap 

concealed stitching is automatically performed regardless of with/

without this setting.

- - -

Used

Not used

Changeover of right/wrong side of material in the corner knife 
setting screen

Material displayed in the corner knife setting screen is selected to right 
side display or wrong side display.

- - -

Right side display

Wrong side display

Stacker timer 5

Sets the waiting time of the stacker from the start of material grasping 
operation to the release of the material

This setting is available when 

 "Grasping stacker (optional)" is used.

0.00 - 9.99/

 

0.01 sec

1.00 sec

Stacker timer 6

Sets the duration of operating the oscillating arm

This setting is available when 

 "Grasping stacker (optional)" is used. 

0.00 - 9.99/

 

0.01 sec

1.50 sec

Number of stitches of grease-up

Number of stitches of sewing machine motion after replenishing grease 

is indicated.

*  When pressing CLEAR button, number of stitches is cleared to “0”. 

Be sure to clear after replenishing grease.

- - -

- - -

Language selection

Language to be indicated in the panel is selected.

- - -

No selection

 Japanese

 English

 Chinese (traditional)

 

Chinese (simplified)

 Spanish

 Italian

 French

 German

 Portuguese

 Portuguese

 Vietnamese

 Korean

 Indonesian

 Russian

※

. . . Item that is not displayed due to other setting state

Summary of Contents for APW-896N/IP-420















































































































































Reviews:

No comments