JUKI AMB-289, Engineer'S Manual

Page: 84 / 177

– 80 –
1st stitch hole position of upper button (longitudinal) –2.00 to 4.00 0.05 1.80
1st stitch hole position of upper button (lateral) –2.00 to 4.00 0.05 1.80
1st stitch hole position of lower button (longitudinal) –13.00 to 4.00 0.05 1.60
1st stitch hole position of lower button (lateral) –2.00 to 4.00 0.05 1.60
Whole compensation of button holding position (lateral) –3.0 to 3.0 0.1 0
Compensation of shank/marble blindstitch position (left) –2.0 to 2.0 0.1 0
Hole position of shank/marble button –5.0 to 5.0 0.1 0.5
Tie stitch position of 1st stitch at the start of sewing of –4.0 to 4.0 0.1 0
neck wrapping (longitudinal)
Tie stitch position of 1st stitch at the start of sewing of – 4.0 to 4.0 0.1 –0.3
neck wrapping (lateral)
Tie stitch position of 2nd stitch at the start of sewing of –4.0 to 4.0 0.1 1.0
neck wrapping (longitudinal)
Tie stitch position of 2nd stitch at the start of sewing of –4.0 to 4.0 0.1 0.3
neck wrapping (lateral)
Stitch width of neck wrapping (right side) 0 to 5..0 0.1 3.0
Stitch width of neck wrapping (left side) 0 to 5.0 0.1 3.0
Start position of neck wrapping –1.0 to 3.0 0.1 1.0
Top position of neck wrapping –1.0 to 5.0 0.1 0
1st stitch of first compensation of tie stitch position at –1.0 to 1.0 0.1 0.3
the end of button sewing (longitudinal)
No. Item Setting range Edit unit Initial display Remarks
(3) Data list
1. In case of point setting mode
2. In case of sewing motion step mode
3. Parameter which can be set depends on sewing method and sewing shape.