JUKI AMB-289, Engineer'S Manual

Page: 146 / 177

– 142 –
5. E015 (Format error) is 5-1) Smart media is in the writing 1-A) Write prohibition seal is Strip off the seal.
displayed. prohibited state. pasted on the smart media.
1-B) Reading section of the Clean the reading section.
smart media is dirty.
1-C) Inside of the throttle of the Clean the inside of the throttle.
smart media is dirty.
1-D) Smart media is broken. Replace the smart media.
6. E016 (External media 6-1) Capacity of smart media is 1-A) Space region is not in the Delete the inside data of the smart media and secure the
capacity over) is displayed. lacking. smart media. space region.
6-2) Recognition of the smart 2-A) Reading section of the Clean the reading section.
media cannot be performed. smart media is dirty.
2-B) Inside of the throttle of the Clean the inside of the throttle.
smart media is dirty.
2-C) Smart media is broken. Replace the smart media.
7. E017 (EEP-ROM capacity 7-1) Capacity of MAIN EEP-ROM 1-A) EEP-ROM of 256K is Replace it with EEP-ROM of 1M.
over) is displayed. is lacking. mounted.
1-B) MAIN p.c.b. is broken. Replace MAIN p.c.b.
1-C) MAIN EEP-ROM is broken. Replace EEP-ROM
8. E019 (File size over) is 8-1) File size to be read is too Check size of file.
displayed. large.
1-A) File is broken. Check the file.
Trouble Cause (1) Cause (2) Inspecting order and adjusting procedure