JUKI AMB-289, Engineer'S Manual

Page: 116 / 177

– 112 –
Pedal motion mode
Motion mode of the pedal is set.
1 : Lower the button by depressing the front part of the pedal.
Lower the cloth presser with the tongue sensor.
2 : Lower the button and the cloth presser by depressing the
front part of the pedal.
3 : Lower the button and the cloth presser with the tongue
sensor.
Button loader motion mode
Motion mode of the button loader is set.
: Unused
: Automatic inserting mode
: Pedal inserting mode
Cloth take-out time
Waiting time for operator to take out cloth
is set in case of sewing flat button di-
rectly to cloth and counter sewing.
Setting of button loader standby
position
Soft start mode (button sewing)
Soft start 1st stitch (button sewing)
Soft start 2nd stitch (button sewing)
Soft start 3rd stitch (button sewing)
No. Item Settomg range Ddit unit Initia display Remarks
1 to 3 1 1
– – – – – –
Automatic
inserting
mode
0 to 20.0 0.1s 2.0s
0 to 90 1 ° 20 °
– – – – – –
Rather fast
200 to 1200 100rpm 400rpm *1
200 to 1200 100rpm 600rpm *1
200 to 1200 100rpm 800rpm *1
*1 Displayed only when is set optionally.
8. MEMORY SWITCH
(1) Memory switch data list
1) Level 1
Memory switch data (level 1) are the motion data that the sewing machine has in common and the data that
operate on all sewing patterns in common.
(Unit : rpm)
Display 1st 2nd 3rd 4th 5th
stitch stitch stitch stitch stitch
300 400 700 900 1100
: Slow
400 600 800 1000 1200
: Rather fast
800 1000 1200 1200 1200
: Fast
Optional setting