JUKI AMB-289, Engineer'S Manual

Page: 134 / 177

– 130 –
Error code Pictograph Description of error How to recover Place of recovery
E019 File size over Possible to Previous screen
File siza to be read in is too large. recover by reset.
E022 File No. error Possible to Previous screen
There is no designated file in the server or external recover by reset.
media.
E023 Detection of step-out of presser lifting Possible to Data input screen
motor error recover by reset.
When step-out of motor is detected at the time
when presser lifting motor passes the origin sensor.
E024 Pattern data size over Possible to Data input screen
When sewing cannot be performed since the size recover by reset.
of downloaded sewing data is too large.
E027 Read error Possible to Previous screen
Data read from server cannot be performed. recover by reset.
E028 Write error Possible to Previous screen
Data write to the server cannot be performed. recover by reset.
E029 Smart media slot release error Possible to Previous screen
Lid of smart media slot is open. recover by reset.
E030 Needle bar upper position failure Possible to Data input screen
When needle does not stop at UP position at the recover by reset.
time of needle UP operation.
E031 Air pressure drop Possible to Data input screen
When air pressure dropped. recover by reset.
E042 Operation error Possible to Data input screen
Operation of sewing data cannot be performed. power.