JUKI AMB-289, Engineer'S Manual

Page: 136 / 177

– 132 –
Error code Pictograph Description of error How to recover Place of recovery
E399 Chuck inversion sensor can not detect. Possible to Data input screen
When the sensor fails to work at the time of chuck recover by reset.
inversion operation.
E401 Copy disapproval error Possible to restart Pattern list screen
When trying to perform copying to the pattern after pressing
No. which has been registered. cancel button.
In case of cycle stitching :
E402 Pattern deletion error Possible to restart Pattern list screen
When the registered pattern No. is registered to after pressing
cycle stitching, or trying to delete the pattern No. cancel button.
when there is only one pattern No.
In case of cycle stitching :
E497 Tongue type error Possible to Data input screen
When AMB-289 type tongue and AMB-189 type recover by reset.
one are mixed used in the cycle data.
E498 Button holding height over at the time of sewing Possible to Data input screen
Button holding height is too high and sewing recover by reset.
cannot be performed at the time of button sewing.
E499 Y feed motor move limit value over Possible to Data input screen
When input data of shank/marble sewing exceed recover by reset.
the maximum of Y feed move amount
(max. operating amount : 15 mm).
E702 Abnormality of display data Turn OFF the
When there is no display data of panel. power.
Rewriting of
program.
E703 Panel is connected to the machine other than Possible to rewrite Commnunication
supposed. (Machine type error) program after screen
When machine type code of system is improper in pressing down
case of initial communication. communication
switch.
E704 Disagreement of system version Possible to rewrite Commnunication
When version of system software is improper in program after screen
case of initial communication. pressing down
communication
switch.
E730 Main shaft motor encoder defectiveness or Turn OFF the
phase-out power.
When encoder of sewing machine motor is
abnormal.