JUKI AMB-289, Engineer'S Manual

Page: 94 / 177

– 90 –
d
d
d
EPD
EPD
Data edit screen
1) Press key for three seconds.
Communication screen 1
2) Press key .
3) Press key .
(2) Setup of operation panel
When the case is as below, it is necessary to perform re-setup of the program of the operation panel.
o When the operation panel is used as that for other model.
o When version-up of the program is performed.
The way of performing setup of the program from the smart media is shown below. Besides, it is regarded that
the program to perform setup has already entered the smart media card.
1) First, turn ON the power. Normally, the sewing ready screen is displayed.
2) Insert the smart media card into the operation panel.
3) Perform operation by the procedure below.
Data selection screen
4) Press key .
5) Press key .
EPD