JUKI AMB-289, Engineer'S Manual

Page: 119 / 177

– 115 –
Tongue change display mode
When READY key is pressed, whether AMB-189 type
tongue or AMB-289 type one is judged, and displays
below are shown.
* Judge value is determined with .
: Without display
: When tongue change is necessary
: When AMB-189 type tongue (wide
gauge) is used
: When AMB-289 type tongue
(narrow gauge) is used
: Tongue type used is displayed
each time.
Tongue change blindstitch width
Blindstich width which is the standard
to make the check screen display.
Pedal type
Kind of pedal to be used is set.
: Standard pedal
: PK-47
Needle rocking motor origin compensation
X feed upper motor origin compensation
Y feed upper motor origin compensation
Y feed lower motor origin compensation
(blindstitch origin)
Y feed lower motor origin compensation
(neck wrapping compensation)
Y feed lower motor origin compensation
(origin of button sewn directly to cloth)
Presser motor origin compensation
Thread drawing motor origin compensation
Loader motor origin compensation
No. Item Settomg range Ddit unit Initia display Remarks
– – – – – –
When tongue
change is
necessary
1.0 to 20.0 0.1mm 1.6
– – – – – –
Standard
pedal
–5.00 to 5.00 0.05mm 0 *1
–2.0 to 2.0 0.1mm 0 *1
–5.00 to 5.00 0.05mm 0 *1
–5.00 to 5.00 0.05mm 0 *1
–5.00 to 5.00 0.05mm 0 *1
–5.00 to 5.00 0.05mm 0 *1
–50 to 50 1pulse 0 *1
–10 to 10 1pulse 0 *1
–50 to 50 1pulse 0 *1
*1 Data that have been memorized in the machine head EEP-ROM, and the adjustment value has been written at
the time of delivery.