JUKI AMB-289, Engineer'S Manual

Page: 135 / 177

– 131 –
Error code Pictograph Description of error How to recover Place of recovery
E050 Stop switch Possible to Data input screen
When stop switch is pressed during machine recover by reset.
running.
E098 Needle bar down error Possible to Setup screen
When needle bar cannot be lowered. recover by reset.
E099 Loader motor step-out detection error Possible to Data input screen
When step-out of motor is detected at the time recover by reset.
when loader motor passes origin sensor.
E302 Confirmation of tilt of machine head Possible to Data input screen
When tilt of machine head sensor is OFF. recover by reset.
E303 Main shaft semilunar plate sensor error Turn OFF
Semilunar plate of sewing machine motor is the power.
abnormal.
E394 Feed plate lowering sensor can not detect. Possible to Data input screen
When feed plate lowering sensor fails to work. recover by reset.
E395 Feed plate lifting sensor can not detect. Possible to Data input screen
When feed plate lifting sensor fails to work. recover by reset.
E396 Tongue close/open sensor can not detect. Possible to Data input screen
When the sensor fails to work, or the tongue is not recover by reset.
drawn out at the time of tongue close/open operation.
E397 Chuck close/open sensor can not detect. Possible to Data input screen
When the button is not in the chuck at the start of recover by reset.
sewing machine operation.
E398 Chuck level sensor can not detect. Possible to Data input screen
When the sensor fails to work at the time of chuck recover by reset.
level operation.