3.OPERATIONS
59
DATA INPUT
SPEED INPUT
▲▲
DATA INPUT
OFF
SENSOR
EXT.
▲
▲
MARK RETURN TO INITIAL MENU
GRAPH CLOSE MENU
TEMP. INPUT
SPEED INPUT
OFF
SENSOR
EXT.
INITIAL SETTING
DATA INPUT
DATA INPUT
TEMP. INPUT
▲
▲
▲
▲
▲
INITIAL SETTING
MARK RETURN TO PREVIOUS MENU
GOTO SUB MENU
GRAPH CLOSE MENU
▼
▲▲
▲
▲
U
N
I
T
CALIBRATION
VR CURVE
BTM. DEC. LEVEL
EXT. TRIG. IN
EXT. SIG. IN
DATA INPUT
DATA OUTPUT
C CURVE
HI
LO
OFF ON
ON
OFF
LINEAR
0
0
▲▲
DATA INPUT
OFF
SENSOR
EXT.
▲
▲
MARK RETURN TO INITIAL MENU
GRAPH CLOSE MENU
TEMP. INPUT
SPEED INPUT
OFF
SENSOR
EXT.
FISH FINDER SETTING
INITIAL SETTING
FISH FINDER SETTING
HI
OFF
AUTO
▲▲
GOTO SUB MENU
GRAPH CLOSE MENU
▲
▲
▲
▲
▲
▲
▲
▲
INTERFERENCE
COLOR REJ.
FREQ. ADJUST
TX CYCLE MODE
1
2
3
4
5
6
7
8
SIGNAL PROCESS
INITIAL SET
STC MODE
TX CYCLE ADJ.
ADC MODE
TX PULSE WIDTH
WHITE LINE
P
D
C
1R1
0.0
LO
0.0
HI
D
D
LO
HI
200.0
50.0
LO
LONG
OFF
SYNC.
0
50
100
1
2
150
200
ASYNC.
SHORT
1R2
Receiving external water temperature data (TEMP. INPUT)
Select "SENSOR" to connect an external water temperature sensor
directly to your fishfinder, or "EXT." to receive external water
temperature data using the NMEA-0183.
The types of water temperature sensors which can be connected
are listed below.
1
CHG-97 (Water temperature/vessel speed sensor)
2
T80 (Compact water temperature sensor, Approx. error rate:
±0.5 degC.)
3
OP-102J (Kingston-mounted type, Approx. error rate: ±0.3
degC.)
When no water temperature sensors or water temperature data
lines are connected, water temperature display will disappear
automatically.
Specify the water temperature input method as follows:
1
Display the FISH FINDER SETTING menu by pressing the
and
keys together.
2
Move control to "INITIAL SETTING" by pressing the
or
key, and display the INITIAL SETTING submenu by pressing the
key.
3
Move control to "DATA INPUT" by pressing the
or
key,
and display "DATA INPUT" by pressing the
key.
4
Move control to "TEMP. INPUT" by pressing the
or
key.
5
Move control to either "SENSOR" or "EXT." by pressing the
or
key.
6
Press the
MARK
key to return to the INITIAL SETTING menu.
7
Press the
GRAPH
key to return to the fishfinding display.
Receiving external vessel speed data (SPEED INPUT)
Select "SENSOR" to connect an external vessel speed sensor directly to
your fishfinder, or "EXT." to receive vessel speed data using the NMEA-
0183.
The CHG-97 (water temperature/vessel speed sensor) can be
connected.
Specify the vessel speed input method as follows:
1
Display the FISH FINDER SETTING menu by pressing the
and
keys together.
2
Move control to "INITIAL SETTING" by pressing the
or
key, and display the INITIAL SETTING submenu by pressing the
key.
3
Move control to "DATA INPUT" by pressing the
or
key,
and display "DATA INPUT" by pressing the
key.
4
Move control to "SPEED INPUT" by pressing the
or
key.
5
Move control to either "SENSOR" or "EXT." by pressing the
or
key.
6
Press the
MARK
key to return to the INITIAL SETTING menu.
7
Press the
GRAPH
key to return to the fishfinding display.
