Z2 Controller Operations Manual
Z2C Installation and Operation Manual
5-6
Interoperability Now
Figure 5-2: JPS Bridge Channel Configuration
If audio encryption is preferred on this channel and has been licensed, enable it (
Yes
), select the
Encryption Type
, and enter an
Audio Encryption String
composed of letters, numbers, spaces,
and/or symbols. Note that the
Enable Audio Encryption
option is provided on a channel-by-
channel basis for JPS Bridge and JPS RoIP channels, and it does not need to be enabled on every
channel.
Figure 5-3: Enable Encryption (Optional, Licensed Feature)
Encryption is an optional feature available by license on select JPS devices. If the button or the
option is grayed out and encryption is desired, contact JPS to purchase a license. If you already
possess a license key and need to enter it, see Section 5.2.1
Note: The Encryption configuration must match for both sides of the connection.
Therefore,
encryption must be turned on (Yes) or off (No) for both sides of the connection. If there is a
mismatch, audio will be unintelligible. The
Encryption Type
must also be the same, and the
Audio
Encryption String
must be entered and match. The
Audio Encryption String
is a user-defined
string between 32 and 128 characters long. Any characters, spaces, symbols, or numbers may be
used.
Remember:
Security Settings changes will be applied on a system
Refresh
.