Z2 Controller Operations Manual
Z2C Installation and Operation Manual
2-2
Interoperability Now
2.4
Installation Considerations
The Z2 Controller must be installed in a location that provides both protection from the weather
and assurance of ambient temperatures between -20 and +60 degrees C. The unit is neither splash
proof nor corrosion resistant and must be protected from exposure to salt spray.
The unit does not have nor require an internal cooling fan.
2.5
Mechanical Package
The Z2 Controller is housed in an aluminum enclosure, 1.5”H x 7.75”W x 6.5”D (38 x 200 x 160
mm). The unit weighs 2.0 lbs (900 gr). The bottom panel of the unit includes a set of 6-32 flush
nuts to allow the Z2C to be mounted to a tray or other flat surface. The width allows two units to
be mounted side by side on a typical tray for a 19-inch rack.
Check the
Help
tab documentation for a 1:1 template of the Z2 Controller (shown below;
identical to the RSP-Z2), It can be printed out to facilitate mounting. Dimensions in millimeters.
Figure 2-1: Z2 Controller Bottom View with Dimensions and Mounting Holes