Engineering manual - UniSAB III 1.10.8
276/346
001930 en 2021.06
UniSAB III (boot) and communication set-up
The following files are for internal use only. Do not try to open or modify these files as this may crash the
system.
•
ShutdownLog.xml - (for internal use only, do not modify)
•
TimeLog.xml - (for internal use only, do not modify)
•
watchdogLog.log - (for internal use only, do not modify)
•
Vfd.dat - (for internal use only, do not modify)
To
transfer (upload)
the displayed files from the SD flash card to UniSAB III, press
and follow the in-
struction on the screen. The following types of files can be uploaded:
•
UniSABIII_1065.strip - (program application, not visible in the file overview)
•
ResourceBundles – (language file library)
•
ResourceBundle - (English language file)
•
ResourceBundle_xx - (language file for xx language)
•
UniqueConfig.xml - (configuration file, version info, IP setup)
•
HMIsettings.xml - (configuration file, favourite’s setup)
•
Configuration.xml - (configuration file, configuration setup)
•
AnalogInput.xml - (configuration file, analogue limits setup)
•
PIDSettings.xml - (configuration file, PID parameter setup)
•
Timers.xml - (configuration file, timer setup)
•
R000Table.xml - (configuration file, refrigerant R000 setup)
•
Modbus.xml - (Modbus TCP address look up file)
The following files are for internal use only. Do not try to open or modify these files as it may crash the
system.
•
ShutdownLog.xml - (for internal use only, do not modify)
•
TimeLog.xml - (for internal use only, do not modify)
•
Vfd.dat - (for internal use only, do not modify)
•
Watchdog.log - (for internal use only, do not modify)
•
Flashload.sem - (for internal use only, do not modify)
Choose the software version you want to upload, in this case version 1.0.6.5, and press
.
Summary of Contents for SABROE Unisab III Control
Page 1: ...UniSAB III control Version 1 10 8 Engineering manual EN...
Page 2: ......
Page 347: ......
