Jersey Jack Pinball Dialed in!, Operation Manual

Page: 61 / 372

The Dialed In Menu System B-19
Statue (Betty) Diverter Test
When you enter the Statue ( Betty) Diverter Test , the LCD monitor will display the screen shown in
figure B19. The upper square on the screen represents the state of the microswitch on the Robot
Betty Assembly (in the upper right corner of the playfield). This switch is activated when Betty's
diverter arm is in the down position. The lower square represents the state of the Enter button. A
green square indicates an activated microswitch (or a button being pressed); a transparent square
indicates an inactive microswitch (or no button being pressed).
You can use the
Enter
button to activate Betty's motor. Running the motor will change the position
of Betty's diverter arm and allow you to test the functionality of the microswitch.
To exit the Statue Diverter Test at any time, press the Back/Escape button.
Figure B19. Statue (Betty) Diverter Test screen.