Jeep WRANGLER 2020, Owner'S Manual, Page: 477 / 548

GETTING TO KNOW YOUR VEHICLE 15
Any faults in charging are displayed by the LEDs, either steady or flashing, located on the front of the charging status control unit. Refer to the table
below.
Mode 2 Charging System Failure
Green LED Red LED Yellow LED Description Action/Consequences
OFF OFF OFF
Charging cable not connected to the
domestic charging socket or power failure in
the domestic power supply mains.
ON OFF OFF
There are no faults in the domestic power
supply mains, so the charging cable can be
connected to the charge inlet on the vehicle.
ON ON (Flashing) ON
Overheating at the charging socket of the
domestic power supply mains.
When the normal temperature is reached,
the system will make a new charge attempt
at a lower current level.
ON OFF ON (Flashing)
Charging to a lower current level due to
overheating of the charging socket of the
domestic power supply mains.
ON ON ON (Flashing)
Overheating at the charging socket of the
domestic power supply mains.
Carefully disconnect the charge cable from
both the vehicle and power outlet and wait
for the plug and outlet to return to normal
temperatures. Then, reconnect the cable to
the power outlet and vehicle and charge
again.
Contact a certified electrician in case of a
new anomaly.
2
21_JL_H_SU_EN_EU_t.book Page 15