Jeep WRANGLER 2020, Owner'S Manual, Page: 192 / 548

190 STARTING AND OPERATING
Weight-Distributing Hitch
A weight-distributing hitch works by applying
leverage through spring (load) bars. They are
typically used for heavier loads to distribute
trailer tongue weight to the tow vehicle's front
axle and the trailer axle(s). When used in
accordance with the manufacturer directions, it
provides for a more level ride, offering more
consistent steering and brake control thereby
enhancing towing safety. The addition of a
friction/hydraulic sway control also dampens
sway caused by traffic and crosswinds and
contributes positively to tow vehicle and trailer
stability. Trailer sway control and a weight
distributing (load equalizing) hitch are
recommended for heavier Tongue Weights (TW)
and may be required depending on vehicle and
trailer configuration/loading to comply with
Gross Axle Weight Rating (GAWR) requirements.
B
REAKAWAY
C
ABLE
A
TTACHMENT
European braking regulations for braked
trailers up to 7,700 lb (3,500 kg), require
trailers to be fitted with either a secondary
coupling or breakaway cable.
The recommended location for attaching the
normal trailer's breakaway cable is in the
stamped slot located on the sidewall of the
hitch receiver.
With Attachment Point

For detachable tow bars, pass the cable
through the attachment point and clip it back
onto itself or attach the clip directly to the
designated point.
Detachable Ball Clip Loop Method
WARNING!

An improperly adjusted weight-distributing
hitch system may reduce handling, stability,
braking performance, and could result in a
collision.

Weight Distributing Systems may not be
compatible with surge brake couplers.
Consult with your hitch and trailer manufac-
turer or a reputable Recreational Vehicle
dealer for additional information.
21_JL_OM_EN_EU_t.book Page 190