Jeep WRANGLER 2020, Owner'S Manual, Page: 512 / 548

50 STARTING AND OPERATING

Transmission shifting will be more noticeable
when AutoStick is enabled.

The system may revert to automatic shift
mode if a fault or overheat condition is
detected.
NOTE:
When Selec-Speed Control is enabled, AutoS-
tick is not active.
To disengage AutoStick mode, return the gear
selector to the DRIVE position. You can shift in
or out of the AutoStick position at any time
without taking your foot off the accelerator
pedal.
REFUELING THE VEHICLE
1. Put the vehicle in the PARK position.
2. Push the fuel filler door release button
(located below the headlight switch).
Fuel Filler Door Release Switch
3. Pushing the button will initiate a sequence
of events to depressurize the fuel system. A
message will display in the cluster letting
you know when the vehicle is ready to be
fueled.
Instrument Cluster Message
NOTE:

After pushing the release button you will
have 20 minutes to fuel the vehicle;
beyond 20 minutes you will need to push
the release button again.

The fuel door should take 15 seconds to
open under normal conditions. It may
take longer to open in some situations,
such as high ambient temperatures.

If you hear a hissing sound when the
nozzle is inserted into the filler pipe, wait
to begin fueling the vehicle until after the
hissing sound stops.
WARNING!
Do not downshift for additional engine braking
on a slippery surface. The drive wheels could
lose their grip and the vehicle could skid,
causing a collision or personal injury.
21_JL_H_SU_EN_EU_t.book Page 50