Jeep WRANGLER 2020, Owner'S Manual, Page: 44 / 548

42 GETTING TO KNOW YOUR VEHICLE
F
OLD
A
ND
T
UMBLE
R
EAR
S
EAT
— T
WO
D
OOR
M
ODELS
NOTE:

Prior to folding the rear seat, it may be neces-
sary to reposition the front seats.

Be sure that the front seats are fully upright
and positioned forward. This will allow the
rear seat to fold down easily.
Folding The Rear Seat
1. Lift the seatback release lever and fold the
seatback forward.
Rear Seatback Release Lever
2. Slowly flip the entire seat forward.
Using The Retention Straps
1. There are two retention straps located on
the back of the rear seat and two
corresponding wire loops located on the
back of each B-pillar. Open the
hook-and-loop fastener on the strap and
thread through the wire loop. Fold the
hook-and-loop fastener over to keep the
seat in the folded position. This should be
done on both sides.
Rear Seat Tumble Position Retention Strap
2. To return the seat to its normal upright
position, reverse these steps.
Removing The Rear Seat
1. Push down on the release bar on each
side, and pull the seat out and away from
the lower bracket.
Release Bar Location
2. Remove the seat from the vehicle.
3. To reinstall the rear seat, just reverse these
steps.
NOTE:
Do not drive the vehicle without reattaching the
rear seat latches.
21_JL_OM_EN_EU_t.book Page 42