Jeep WRANGLER 2020, Owner'S Manual, Page: 486 / 548

24 GETTING TO KNOW YOUR VEHICLE
remains in the vehicle or is removed. The horn
will sound three times if the fob is removed from
the vehicle and the ignition state is in READY
mode. To restart the vehicle, follow the normal
process for starting your vehicle.
The Keyless Push Button Ignition has several
operating modes that are labeled and will
illuminate when in position. These modes are
OFF, ACC, RUN, and START.
NOTE:

Pushing the START/STOP ignition button may
only activate the Electric Propulsion System
and not start the vehicle’s engine (if running
the engine is not currently required by the
Hybrid system). READY will show in instru-
ment cluster display whenever the vehicle is
operating in Electric-only (EV) mode and the
vehicle is stationary.

If the vehicle’s ignition is in either ACC or
RUN, the vehicle charge indicator may not
display a value greater than 99% state of
charge due to vehicle loads.
Keyless Push Button Ignition
The ignition can be placed in the following
positions:
OFF

The vehicle is stopped

Some electrical devices are available
ACC

Some electrical devices are available

Mechanical power (Vehicle Propulsion) is not
available
RUN

Driving position

All the electrical devices are available

As long as READY appears in the instrument
cluster display, it does not matter if the
engine is running or not, vehicle propulsion is
available
START

The vehicle will start
NOTE:
Vehicle propulsion is only available after the
vehicle has passed through the START position.
Conditions Which May Cause The Engine To
Run

When the Hybrid Battery State of Charge
(SOC) has reached <1%

When applying maximum vehicle accelera-
tion

While maintaining the Exhaust System Cata-
lyst Temperature in Hybrid or E-Save modes

When the hood is open with the ignition in
RUN, post-START mode
1 — OFF
2 — ACC
3 — RUN
21_JL_H_SU_EN_EU_t.book Page 24