Jeep WRANGLER 2020, Owner'S Manual, Page: 40 / 548

38 GETTING TO KNOW YOUR VEHICLE
If you see the NAV icon on the bottom bar or in
the Apps menus of your 8.4-inch touchscreen,
you have the Uconnect 4 NAV system. If not, you
have a Uconnect 4 with 8.4-inch display system.
B
ASIC
V
OICE
C
OMMANDS
The basic Voice Commands below can be given
at any point while using your Uconnect system.
Push the VR button on the steering wheel. After
the beep, say:

“Cancel” to stop a current voice session.

“Help” to hear a list of suggested Voice
Commands.

“Repeat” to listen to the system prompts
again.
Notice the visual cues that inform you of your
Voice Recognition system’s status.
G
ET
S
TARTED
The VR button is used to activate /deactivate
your Voice Recognition system.
Helpful hints for using Voice Recognition:

Reduce background noise. Wind noise and
passenger conversations are examples of
noise that may impact recognition.

Speak clearly at a normal pace and volume
while facing straight ahead.

Each time you give a Voice Command, first
push the VR button, wait until after the beep,
then say your Voice Command.

You can interrupt the help message or
system prompts by pushing the VR button
and saying a Voice Command from the
current category.
Uconnect Voice Command Buttons
A
DDITIONAL
I
NFORMATION
© 2021 FCA. All rights reserved. Mopar and
Uconnect are registered trademarks and Mopar
Owner Connect is a trademark of FCA. Android™
is a trademark of Google Inc.
1 — Push To Start Or Answer A Phone Call And
Send Or Receive A Text
2 — Push The Voice Recognition Button To Begin
Radio, Media, And Climate Functions
3 — Push To End Call
21_JL_OM_EN_EU_t.book Page 38