Jeep WRANGLER 2020, Owner'S Manual

Page: 241 / 548

MULTIMEDIA 239
CANCEL COMMAND
At any prompt, after the beep, you can say
“Cancel” and you will be returned to the main
menu.
You can also push the VR button or Phone
button on your steering wheel when the system
is listening for a command and be returned to
the main or previous menu.
PAIR (LINK) UCONNECT PHONE TO A MOBILE
PHONE
To begin using your Uconnect Phone, you must
pair your compatible Bluetooth®-enabled
mobile phone. Mobile phone pairing is the
process of establishing a wireless connection
between a cellular phone and the Uconnect
system.
Uconnect 3 With 5-inch Display
Uconnect 4 With 7-inch Display
NOTE:

You must have Bluetooth® enabled on your
phone to complete this procedure.

The vehicle must be in PARK or at a standstill.
Follow the steps below to pair your phone:
1. Place the ignition in the ACC or ON/RUN
position.
2. Press the Phone button.
NOTE:

If there are no phones currently
connected with the system, a pop-up will
appear asking if you would like to pair a
mobile phone.

This pop-up only appears when the user
enters Phone Mode and no other
device(s) have previously been paired. If
the system has a phone previously
paired, even if no phone is currently
connected with the system, this pop-up
will not appear.
5
21_JL_OM_EN_EU_t.book Page 239