Jeep WRANGLER 2020, Owner'S Manual, Page: 48 / 548

46 GETTING TO KNOW YOUR VEHICLE
Rear Head Restraint Lever
Rear Head Restraint Folded
To return the head restraint to its upward
position, lift up on the head restraint until it
locks into place.
To raise the center head restraint, lift up on the
head restraint. To lower the center head
restraint, push the adjustment button, located
at the base of the head restraint, and push
down on the head restraint.
To remove the center head restraint, push the
release button, located on the base of the head
restraint, and pull upward on the head restraint.
To install the head restraint, hold the release
button while pushing downward on the head
restraint. For information on child seat tether
routing, see
Ú
page 280.
NOTE:
Lower the center head restraint to avoid contact
with the center console when folding the seat
down.
WARNING!

Do not drive the vehicle without the rear
seat head restraints installed while passen-
gers are occupying the rear seat. In a colli-
sion, people riding in this area without the
head restraints installed are more likely to
be seriously injured or killed.

A loose head restraint thrown forward in a
collision or hard stop could cause serious
injury or death to occupants of the vehicle.
Always securely stow removed head
restraints in a location outside the occu-
pant compartment.

ALL the head restraints MUST be rein-
stalled in the vehicle to properly protect the
occupants. Follow the reinstallation instruc-
tions above prior to operating the vehicle or
occupying a seat.
21_JL_OM_EN_EU_t.book Page 46