Jeep WRANGLER 2020, Owner'S Manual, Page: 307 / 548

SAFETY 305
Children who weigh between 9 kg and 18 kg
may be carried in a Group 1, forward facing seat
like the one in fig. B. This type of child restraint
is for older children who are too big for a Group
0 or 0+ child restraint.
Group 2
Fig. C
Children who weigh between 15 kg and 25 kg
and who are too big for the Group 1 child
restraint may use a Group 2 child restraint
system.
As shown in fig. C, the Group 2 child restraint
system positions the child correctly with respect
to the seat belt so that the shoulder belt crosses
the child’s chest and not the neck, and the lap
belt is snug on the pelvis and not the abdomen.
Group 3
Fig. D
Children who weigh between 22 kg and 36 kg
and who are tall enough to use the adult
shoulder belt may use a Group 3 child restraint.
Group 3 child restraints position the lap belt on
the child’s pelvis. The child must be tall enough
that the shoulder belt crosses the child’s chest
and not their neck.
Fig. D shows an example of a Group 3 child
restraint system correctly positioning the child
on the rear seat.
WARNING!

Improper installation can lead to failure of
an infant or child restraint. It could come
loose in a collision. The child could be badly
injured or killed. Follow the child restraint
manufacturer’s directions exactly when
installing an infant or child restraint.

After a child restraint is installed in the
vehicle, do not move the vehicle seat
forward or rearward because it can loosen
the child restraint attachments. Remove
the child restraint before adjusting the
vehicle seat position. When the vehicle seat
has been adjusted, reinstall the child
restraint.

When your child restraint is not in use,
secure it in the vehicle with the seat belt or
ISOFIX anchorages, or remove it from the
vehicle. Do not leave it loose in the vehicle.
In a sudden stop or accident, it could strike
the occupants or seatbacks and cause
serious personal injury.
6
21_JL_OM_EN_EU_t.book Page 305