![background image](http://html1.mh-extra.com/html/jai/vis-cam-system/vis-cam-system_installation-manual_3223355076.webp)
VIS-CAM Systems
64
Appendix B
Figure 71.
J-Panel electrical interface
6.2.3 (c) Ethernet Interface
100 Mb Ethernet interface. The signals are routed directly to RJ45 connector X11. The cable to the camera
must be a Cat 5e or preferably a Cat 6 cable. The wire color marking on the PCB uses standard Ethernet wire
colors.
6.2.3 (d) Power output
Voltage 24VDC from power supply connected to X6 or X7
Current 2A fused
6.2.4
Connector physical Interface
Table 16
Physical interface table
Pin Signal
Description
Connection
to
I/O Board
X4
Remarks
1
Ethernet A+
Ethernet signal to gigabit switch
pin 1
Cat5e/6 cable white/orange
2
Ethernet A-
Ethernet signal to gigabit switch
Pin 2
Cat5e/6 cable orange
3
Ethernet B+
Ethernet signal to gigabit switch
Pin 3
Cat5e/6 cable white/green
4
Ethernet B-
Ethernet signal to gigabit switch
Pin 4
Cat5e/6 cable green
5
Ethernet C+
Ethernet signal to gigabit switch
Pin 5
Cat5e/6 cable white/blue
6
Ethernet C-
Ethernet signal to gigabit switch
Pin 6
Cat5e/6 cable blue
7
Ethernet D+
Ethernet signal to gigabit switch
Pin 7
Cat5e/6 cable white/brown
8
Ethernet D-
Ethernet signal to gigabit switch
Pin 8
Cat5e/6 cable brown
9
Gnd
Power ground
Pin 9
Black wire in Red/Black pair, 20 AWG
10 +24V dc
Supply voltage
Pin 10
Red wire in Red/Black pair, 20 AWG
11 Vinit +
Balanced trigger pulse positive
Pin 11
Red wire in Red/Black pair, 24 AWG shielded
12 Vinit -
Balance tripper pulse negative
Pin 12
Black wire in Red/Black pair, 24 AWG shielded
13
RS485 Data+ for Lane Controller
Pin 13
Brown wire in Brown/Black pair, 24 AWG shielded
14 RS485D-
RS485 Data- for Lane Controller
Pin 14
Black wire in Brown/Black pair, 24 AWG shielded
15
RS485 Data+ for Lane Controller
Pin 15
Orange wire in Orange/White pair, 24 AWG shielded
16 RS485D-
RS485 Data- for Lane Controller
Pin 16
White wire in Orange/White pair, 24 AWG shielded
Summary of Contents for VIS-CAM System
