![background image](http://html1.mh-extra.com/html/jai/vis-cam-system/vis-cam-system_installation-manual_3223355075.webp)
Appendix B
63
VIS-CAM Systems
6.2.1
Functionality
Power and data connection to the EN camera. The 24V power supply for all camera functions (Camera, I/O
Board, light and heaters), Ethernet and RS485 data communication is connected by means of this connector.
6.2.2
Connector specification
Connector type: 16 pole WAGO pluggable terminal block
Connector on board: WAGO 734-246
Cable part: WAGO 734-216
6.2.3
Connector signal specifications
6.2.3 (a) Lane Controller interface
Description
RS485 two wire half-duplex multi-drop communication network. The I/O Board has connections for daisy chain
configuration. The two signal pairs ( and RS485D-) can be reversed.
Signal levels:
Standard RS485 communication levels. Electrical interface on the J-Panel: The signals are connected to J-Panel
X15 pin 1 and 2. There are termination resistors on the board. See Figure 49 for a description of the signal
path.
6.2.3 (b) Trigger output
Description
The trigger output is balanced and the driver is a RS485 transmitter (LTC1480).
Signal levels
The signal levels are at standard RS485 levels. The specification below is taken from Linear Technologies
datasheet for LTC1480:
Table 15
Signal parameters and conditions.
Electrical interface on the J-Panel:
Summary of Contents for VIS-CAM System
