![background image](http://html1.mh-extra.com/html/jai/vis-cam-system/vis-cam-system_installation-manual_3223355096.webp)
VIS-CAM Systems
84
Appendix E
9
Appendix E: Moxa N-Port 5232 Configuration
Configuration of the Moxa N-Port server is done through a standard web-browser or using Telnet.
If you are unfamiliar with the configuration terms, please consult the enclosed Moxa N-Port server manual.
To carry out the configuration using Internet Explorer, type the IP-address of the unit in the address field:
http://192.168.127.254 <CR>
You should now be able to configure the unit through the embedded web-server.
To carry out the configuration using Telnet, open the command prompt window – type the following: Telnet
192.168.127.254 <CR>
You should now be able to configure the unit through the Telnet interface.
The necessary settings will be listed under its designated sub-menu. The items underlined in bold italics
(example - Delimiter:
D
) must be configured as described.
Basic Settings:
Server name:Enter the desired name for the N-Port server.
Time zone:Enter the correct time zone for the system location.
Local time:Enter the correct time for the system location.
Time server: Enter IP-Address or domain name for the desired time server.
Web console:Enables / Disables the web configuration utility.
Telnet console:Enables / Disables the Telnet configuration utility.
Figure 93.
Standard configuration of Basic Settings:
Network Settings:
IP address:Enter the desired IP address of the unit. The default address from the factory is 192.168.127.254
unless otherwise specified.
Netmask:Enter the subnet mask of the unit. The default subnet mask from the factory is 255.255.255.0 unless
otherwise specified.
Summary of Contents for VIS-CAM System
