![background image](http://html1.mh-extra.com/html/jai/vis-cam-system/vis-cam-system_installation-manual_3223355030.webp)
VIS-CAM Systems
18
Installing the Vehicle Imaging System
3
Installing the Vehicle Imaging System
The individual components of the system is electrically linked together as shown in Figure 1, “VIS elements”.
The VIS CAM camera has connections to the J-Panel and an optional Flash, Night Light and Laser Vehicle
Detector. The J-Panel has connection to two VIS CAM 300/400 cameras, one Traffic Light Sensor, a 24V Power
Supply, a Lane Controller, a RS485-to-ethernet converter for the light sensor signals, Trigger input, an
optionally second J-Panel and finally a gigabit Ethernet switch.
3.1
Installing the TNF-300 Traffic Light Sensor.
When installing the Traffic Light Sensor ensure the unit is positioned higher than either the camera or the flash
unit so the A-side is in direct sun whenever the targeted vehicles license plates are. See Section 2.1 for general
site layout guidelines.
It is extremely important the light sensor be properly positioned at the site. The light sensor must be placed so
that no shadows from surrounding structures are cast on side A when the license plates being imaged by the
VISCAM are in direct sunlight.
Because sun angles at any given site can change according to time of day and time of year, it is important to
verify that the proposed setup will function on the actual spot.
3.1.1
To install the Traffic Light Sensor:
1.
Disconnect Power
2.
Loosen the four hex screws and remove the flange from the mounting base. See Figure 16.
Figure 16.
Install the traffic light sensor.
Summary of Contents for VIS-CAM System
