![background image](http://html1.mh-extra.com/html/jai/vis-cam-system/vis-cam-system_installation-manual_3223355090.webp)
VIS-CAM Systems
78
Appendix B
6.11.3
Connector signal specifications
6.11.3 (a) Signal levels
Input signal amplitude 3-24 V Input current app. 1-20 mA
6.11.3 (b) Trigger 0 Electrical interface on the J-Panel
Figure 87.
Trigger 0
6.11.3 (c) Trigger 1 Electrical interface on the J-Panel
Figure 88.
Trigger 1
6.11.4
Connector physical Interface
Table 31
Connector table
Pin
Signal
Description
Connection to
1
Trig0+
Positive trigger input to camera 0
2
Trig0-
Negative trigger input to camera 0
3
Trig1+
Positive trigger input to camera 1
4
Trig1-
Negative trigger input to camera 1
6.12
X15: Lane Controller interface
6.12.1
Functionality
The signal path for the Lane Controller is shown in Figure 83. The signal lines symbolizes the two balanced
RS485 wires.
6.12.1 (a) Common Lane Controller
If one lane controller is to be connected to camera 0 and camera 1, LC DATA terminals labeled D0 on X15 is
used.
The signal runs to Camera 0 and is daisy chained back. When S2 is in position “OPEN” D0 is connected to
Camera 1 and daisy chained back to connector X4. X4 has connection to a termination resistor that is activated
when no plug is inserted into X4. If more J-Panels are to be connected to the same lane controller, see Figure
6.12.5.
6.12.1 (b) Two Lane Controllers
Summary of Contents for VIS-CAM System
