jablotron JA-60 "Comfort", Installation Manual

Page: 33 / 34

built in buzzer. Illuminated keys can be covered with a closeable cover. The keypad has TWO-WAY communication with the control
panel and it is enrolled as a controller (positions c1 to c8). Multiple JA-60F keypads can be enrolled to a single control panel.
power 3 V
=
, 5 0
µ
A / 100 mA (2x AAA battery 1,5V)
battery life time about one year
communication range max. 100 m (open area)
working environment indoor use (-10 to +40 °C)
optional AC adapter 12V ss/100mA
(permanent keys illumination with the adapter)
number of keypads in a system up to total number of 8 controllers
Output devices
Wireless siren JA-60A
is designated for outdoor use. It is powered from its own AC adapter and it has a built in back up battery.
The siren wirelessly communicates with the control panel. It contains a high powered siren and a flashing light. Besides signaling
alarms, it can also provide arming and disarming chirps. The siren has built in tamper detectors. Only one JA-60A siren can be used
with each JA-60 control panel.
power 15V
∼
, 0,5 A, 50 Hz (adapter SELV)
back up battery 6V, 1.3Ah (included) - life time about 5 years
communication range max. 100 m (open area)
siren piezoelectric, 118dB/1m
cover class IP44
working environment external use, -25 to +60°C
The AN-01 external antenna can be used with the siren if a longer working range is requested
or if the siren is installed in a problematic location from the point of radio communication.
Wireless acoustic indicator UC-260
is an indoor device which can be easily plug to the power anywhere in the house. It receives
signals from the control panel and generates all sounds as the system itself (siren, exit entrance beeps etc.). Its LED indicator is follow-
ing the PgY output of the control panel. Additionally it can also serve as a wireless door bell (with RC-22 or RC-28 wireless button) and
JA-60 wireless detector(s) can be enrolled to generate Chime sound when the detector is triggered.
Power 230 V~, 1.5 W
Communicating range up to 100 m
Siren piezo 110dB
Number of melodies 8, selectable volume
Working environment indoor use -10 to +40°C
Wireless outputs unit UC-216
is a receiver, which receives signals from the JA-60 control panel. The unit has two output relays (X
and Y, max. load 120V / 1A each). These relays have identical functions as outputs PgX and PgY of the control panel. The unit requires
external power from 12 to 24VDC or 15VAC. Multiple UC-216’s can be used with a control panel and each UC-216 can receive signals
from more than one control panel.
power 12-24 V
=
or 15 V
∼
, 40 mA
2x output relay max. 120 V/1 A
1x output transistor max. 40 V/0,2 A
communication range with RC-11 & RC-22 max. 30 m
with JA-60 items up to 100 m
working environment indoor use (-10 to +40 °C)
Wireless output unit UC-222
is a receiver, which receives signals from the JA-60 control panel. The unit has a power output relay
(max. 250VAC / 5A). This relay has an identical function as output PgX of the control panel. The unit is powered directly from the AC
power (230 VAC). Multiple UC-222’s can be used with a control panel and each UC-222 can receive signals from more than one control
panel.
power 230 V
∼
consumption 1 VA (0,6 W) standby / 1,8 VA (1 W) relay on
output relay max.6 A, 250 V
communication range with RC-11 & RC-22 max. 30 m
with JA-60 items up to 100 m
working environment indoor use (-10 to +40 °C)
Use of UC-216 and UC-222 directly with JA-60 detectors
- the wireless output modules can also be used directly with JA-60
system items (detectors, keypads, remote controls). In this case the receiving unit reacts to the signals from the items which were en-
rolled to this unit. The item can be a part of the JA-60 alarm system and its data is received by both the control panel and the UC re-
ceiver. Or, the items can be used with UC units directly.
Alarm system JA-60 “COMFORT” - 33 - MDY51319