14. Personal Computer Interface with JA-60
The JA-60 system can be connected to a Personal Computer (PC) locally, using the PC-60A interface cable. It is also possible to dial
into the system from a remote PC (or the JA-60E keypad) using the JA-60U modem (see 15). Comlink software is available for Win-
dows system.
User
can check and operate the JA-60 system easily via their PC, can read complete events memory with all details, can view the
map of the installation (seeing topical triggering of the detectors) etc. However, the user can not change settings of the system.
Installer
who has access rights can program the system, can check the communication quality of the items, can view the level of in-
terference in the location etc. There is also a convenient tool to make a map of the installation, which includes a library of all JA-60
components.
Depending on your access rights, the Comlink software will allow you to open the corresponding screens (see following examples).
There is a clear help in the Comlink program.
"virtual" control panel & complete events list
items testing window & RF signals oscilloscope
programming
dialogs
map of the system (shows current conditions in the house)
15. Remote access to the system
The JA-60U modem is used for the remote connection of a personal computer with Comlink software or a JA-60E keypad to a JA-60 con-
trol panel using a public telephone line. It is necessary to know the access code for the remote control of a system (see 10.2).
It enables a computer to remotely control a JA-60 in the same way as when it connected directly to the JA-60 PC's output (see 19).
Downloading or uploading of extensive data (like event list downloading, digital communicator setting etc.) takes more time compared to a
direct PC connection to the control panel. Instructions about JA-60E remote access you can find in the JA-60E manual.
15.1. Establishing connection with a remote control panel by a computer
Start Comlink SW on a computer equipped with a JA-60U modem (see 19). The dialing dialog requires the following data:
•
telephone number of the called control panel
•
dialing method (tone or pulse)
•
COM port number to which the modem is connected
•
control panel’s remote access code (must be identical as code programmed in the control panel - 8 digits)
•
select bypassing of answering machine (if this option was programmed in the control panel)
•
select call back feature and enter your telephone number, if you want the control panel to call your computer back (that way
the end user’s telephone line will be charged for the remote access communication)
See the JA-60E keypad’s manual for details how to establish connection from a remote keypad.
Alarm system JA-60 “COMFORT”
- 28 -
MDY51319
Summary of Contents for JA-60 "Comfort"
Page 1: ...JA 60 COMFORT Alarm system Installation manual...
Page 2: ......
